Clear Coat Metal Ethan Chair

Start with the Clear Coat Metal Ethan Chair when choosing upholstered back chair furniture for fine dining rooms, hotel restaurants, and private dining rooms. Give this piece a place indoors, away from the weather. Mark out its listed 16 1/2" W x 18 1/2" D x 31" H before arranging the surrounding furniture. Table height belongs on the plan too: about 29 to 30 inches is the dining range used here.

Around the seat, the frame uses metal with a clear coat finish. Here, vinyl forms the seat. Look also at a load rating listed at 500 lb, 18 lb for the item's listed weight, and a back with cushioning when comparing it with nearby choices. Keep these care notes with your closing routine. For vinyl, a mild soap wash followed by drying is the daily approach. Avoid solvent cleaners and bleach. Repair chips in the metal coating promptly, before water can reach beneath the finish.

Allow about 18 to 24 inches behind the chair so a guest can leave without dragging it into the next table. Mark that movement on the plan, not only the legs.

Your selected version brings together your vinyl upholstery choice from Black, Dark gray, Buckskin, or London Tan. Add the chosen configuration to a patio plan before comparing the next piece. Your upholstery choices go into the build, so leave extra time in the opening schedule.