Clear Coat Finish Metal Palmer Chair

For family restaurants, cafes, pubs, and hotel dining rooms, put the Clear Coat Finish Metal Palmer Chair on your shortlist and check its measurements against the space. This model stays on the indoor side of the door. Use 18" W x 21" D x 28 1/2" H as the listed size when checking your space. Table height belongs on the plan too: about 29 to 30 inches is the dining range used here.

Look at the metal frame and its clear coat finish when comparing the build. The seating material on this piece is wood. Other listed details include a stated load limit of 500 lb and an individual weight listed at 12 lb. Keep these care notes with your closing routine. A damp wipe suits the wood finish. Dry any water collecting near the joints. Look for breaks in the metal finish during cleaning and touch them up before moisture spreads underneath.

Put the chair and its table on the plan together. Walk the route from the door while the chair is pulled out, as it will be during service.

Work through these choices before setting the quantity: 8 available versions of wood back finish, including Natural, Walnut, and Dark Walnut, the available seat type: Wood Seat, Padded Vinyl Seat, and Padded Fabric Seat, and 40 available versions of padded vinyl seat, including Black, Buckskin, and Wine. Later fields appear when an earlier choice calls for them. Keep this choice in a patio plan while you work through the rest of the space. Your upholstery choices go into the build, so leave extra time in the opening schedule.